ConfigNetwork - Revision history

Ariy at 07:27, 2 July 2020

2020-07-02T07:27:20Z

2019-09-19T12:08:06Z

2017-02-28T14:51:19Z

2017-02-28T09:15:41Z

2017-02-27T15:25:12Z

2017-02-27T15:24:53Z

2017-02-27T11:24:59Z

2017-02-27T11:23:38Z

2017-02-27T11:22:46Z

2017-02-27T11:22:21Z

@@ Line 1: / Line 1: @@
 {{DISPLAYTITLE:Network}}
 [[Category:HamsterV5]]
 [[Category:HamsterV4]]

@@ Line 2: / Line 2: @@
 [[Category:HamsterV5]]
 [[Category:HamsterV4]]
 === Network ===

@@ Line 8: / Line 8: @@
 == Hamster Network topology ==
 Name: hamster_net
 Security: WPA2 personal
@@ Line 14: / Line 15: @@
 Netmask: 255.255.255.0
 Router's IP: 10.0.2.138
+</syntaxhighlight>
 == Router configuration, 2nd PI ==
 In order to reach the slave raspberry pi on each Hamster, configure the routing table as following:
@@ Line 20: / Line 22: @@
 * Go to Advanced Routing → Static Routing List → Add...
 * For each robot (numbered <n>), add the corresponding entry:
-−
 Destination IP: 192.168.<n>.0
 Subnet Mask: 255.255.255.0
 Default gateway: 10.0.2.<n>
 == Configuring the Hamsters' IP ==
@@ Line 30: / Line 35: @@
 Robot 1 configuration:
-Master raspberry pi IP: 10.0.2.1  or  192.168.1.1
+* Master raspberry pi IP: 10.0.2.1  or  192.168.1.1
-Slave raspberry pi IP: 192.168.1.2
+* Slave raspberry pi IP: 192.168.1.2
 Robot 2 configuration:
-Master raspberry pi IP: 10.0.2.2  or  192.168.2.1
+* Master raspberry pi IP: 10.0.2.2  or  192.168.2.1
-Slave raspberry pi IP: 192.168.2.2
+* Slave raspberry pi IP: 192.168.2.2
 The Hamster's connection configurations can be changed in the /etc/network/interfaces , and /wpa_supplicant/wpa_supplicant.conf .
 SSH connection details:
 Username: pi
 Password: hamster

@@ Line 1: / Line 1: @@
 {{DISPLAYTITLE:Network}}
 [[Category:HamsterV5]]
 === Network ===

@@ Line 1: / Line 1: @@
 {{DISPLAYTITLE:Network}}
-[[Category:Hamster]]
+[[Category:HamsterV5]]
 === Network ===

← Older revision	Revision as of 15:24, 27 February 2017
(No difference)