Difference between revisions of "Category:Hamster"

Revision as of 11:07, 29 June 2020 (view source) Ariy (talk | contribs) (hamster v6) ← Older edit		Latest revision as of 05:33, 26 October 2021 (view source) Ariy (talk | contribs) (→‎Hamster versions)
(2 intermediate revisions by the same user not shown)
Line 35:		Line 35:
	* [[:Category:HamsterV6|HamsterV6]]		* [[:Category:HamsterV6|HamsterV6]]
	* [[:Category:HamsterV7|HamsterV7]]		* [[:Category:HamsterV7|HamsterV7]]
		+	* [[:Category:HamsterV7I|HamsterV7 Intel]]
		+	* [[:Category:HamsterV7N|HamsterV7 Nvidia]]
	* [[:Category:HamsterProKit|Hamster Pro Kit]]		* [[:Category:HamsterProKit|Hamster Pro Kit]]
		+	* [[:Category:HamsterV8|Hamster V8]]
	=== Hamster research teams ===		=== Hamster research teams ===

---

Latest revision as of 05:33, 26 October 2021

• 

  Hamster in TEDX

• 

  Hamster with Movidius

• 

  Ben Gurion Airport

Quick start

1. Install hamster server - multi-master configuration https://wiki.cogni.io/index.php/HamsterServer

(if your robot was shipped before January 2018 - single-master configuration)

2. Turn on robot

3. Control your agents in hamster.perspective -rqt with mouse, joystick and keyboard:

Select window with agent number:

agents 1-10 switching with 1 ... 0 keyboard buttons

agents 11-20 switching with shift + 1 ... shift + 0

4. See your robot in hamster.rviz

For agents 3-20 change agent number in topic names

Hamster system

Hamster versions

• HamsterV4
• HamsterV5
• HamsterV6
• HamsterV7
• HamsterV7 Intel
• HamsterV7 Nvidia
• Hamster Pro Kit
• Hamster V8

Hamster research teams

The Hamster is being used as a research platform at various institutes

• Ben Gurion University
• Bar Ilan University
• College of Management
• Holon Institute of technology
• Mitsubishi Research lab
• Intel Innovation Lab

Hamster research papers

• Maintaining Communication in Multi-Robot Tree Coverage
• Automated Agents for Advice Provision
• Distributed Accurate Formation Control Under Uncertainty
• Intelligent Agent Supporting Human-Multi-Robot Team Collaboration
• Control Architecture Design for Autonomous Vehicles
• Uncertain Local Leader Selection In Distributed Formation
• Multiple Robots For Multiple Missions: Architecture for Complex Collaboration
• Research lab landing page
• Motion Planning of Autonomous Road Vehicles by Particle Filtering: Implementation and Validation

Hamster models

• 

  HamsterV3

• 

  HamsterV4

• 

  HamsterV5

Robot's components

Each robots has two raspberry pi computers on board - master and slave, and a low level controller.

Master - Has a wifi connection to the hamster network, provides network access to slave. It also connects to the slave computer directly via ethernet cable.

Slave - Second computer, used primarily for GPS data broadcasting, connected to hamster network via master.

Low level controller - Arduino based board responsible for interaction with hardware components.

Operation modes

Hamster robot is capable of running mapping, localization or outdoor localization (using GPS and IMU).

Switching between modes:

In order to change the operation mode publish std_msgs/String message to /mapping_command topic, containing on e of the following strings:

• slam
• localization
• outdoor

Example: <syntaxhighlight lang="bash" line='line'> rostopic pub /mapping_command std_msgs/String "data: 'slam'" </syntaxhighlight> <syntaxhighlight lang="bash" line='line'> rostopic pub /mapping_command std_msgs/String "data: 'localization'" </syntaxhighlight>

When switching from mapping to localization mode, the map is saved by the server, and loaded for localization algorithm.

All maps saved inside ~/hamster_ws/src/hamster_server_launch/maps$

Hamster calibrations and configurations

• Calibrate IMU IMU
• Calibrate Steering Steering
• Config Network Network
• Power and Battery Power
• Commands / Modes Modes

Hamster F.A.Q

• Q: What is the Hamster maximum speed
• A: 1.2m/s
• Q: What is the Hamster minimum speed
• A: 0.1 m/s
• Q: What is the Hamster turning deg sensitivity
• A: ~1 deg
• Q: My Hamster turns in place in a suspicious manner. Why is it?
• A: We call this the Austin Powers turn. This is since the Hamster uses hackerman steering geometry. With 0 linar force and some angular force it results in

Hamster wireless network

Router

• SSID 2.4Ghz: hamster_net
• SSID 5.0Ghz: hamster_net5
• Password: hamsterHAMSTER
• Network: 10.0.2.0
• Netmask: 255.255.255.0
• Gateway: 10.0.2.138

Hamster

• User = pi / hamster (on up squared)
• Password = hamster

Master:

• IP: 10.0.2.n/192.168.n.1

Slave:

• IP: 192.168.n.2

n - stands for agent id, e.g agent7 will have 10.0.2.7/192.168.7.1

Low level controller

Description

The LLC board is responsible for interaction with hardware components such as:

• Motors (drive and steering)
• Encoders (mainly used for PID controller)
• IMU
• Battery monitoring
• Cut-off (shuts down the platform when battery goes below certain voltage)

The LLC is connected to master computer via UART (serial)

A built-in switch is also provided for the possibility of loading new firmware (voids warranty, can be provided per request)

Server

Description:

Usually runs ROS master services, it also loads and publishes the map for localization

Note: hamster robot may be configured to use local ROS master to avoid using dedicated server for this purpose

Project:

• [1]

Master

Description:

Majority of hardware is connected to the master pc, it also acts as network gateway for slave

Hardware

• WiFi ew-7811uac EDIMAX AC600
• Camera raspberry Pi module v2
• LiDar A2M8 (USB)
• IMU AltIMU-10 v5
• Ethernet (to slave)
• Low level controller (via UART)

Slave

Description

GPS data broadcaster

Hardware

• GPS Mouse - GP-808G
• Ethernet (to master)