ConfigNetwork
From cogniteam
Revision as of 11:17, 27 February 2017 by Cogniteam (talk | contribs) (Created page with "Category:Hamster === Network === In case you are not using a preconfigured router, the following describes the router needed configuration. Name: hamster_net Security:...")
Network
In case you are not using a preconfigured router, the following describes the router needed configuration.
Name: hamster_net
Security: WPA2 personal
Password: hamsterHAMSTER
Netmask: 255.255.255.0 Router's IP: 10.0.2.138
Also, in order to reach the slave raspberry pi on each Hamster, configure the routing table as following: Go to Advanced Routing → Static Routing List → Add... For each robot (numbered <n>), add the corresponding entry:
Destination IP: 192.168.<n>.0 Subnet Mask: 255.255.255.0 Default gateway: 10.0.2.<n>
