ConfigNetwork

Network

In case you are not using a preconfigured router, the following describes the router needed configuration.

Name: hamster_net Security: WPA2 personal Password: hamsterHAMSTER

Netmask: 255.255.255.0 Router's IP: 10.0.2.138

Also, in order to reach the slave raspberry pi on each Hamster, configure the routing table as following: Go to Advanced Routing → Static Routing List → Add... For each robot (numbered <n>), add the corresponding entry:

Destination IP: 192.168.<n>.0 Subnet Mask: 255.255.255.0 Default gateway: 10.0.2.<n>